How to Make a Homemade SPY Listening Device: Do you know how much work was done at home and how old things are done? Old things can be used to create many types of work that can be of great help to you. Do you know that the box of the box which you throw can be made from a powerful microphone? Do not know, so let us tell you How to Make a Homemade SPY Listening Device.
You need it for:
1. empty box or a plastic cup of the matchbox.
2. Pencil or graphite lead
3. Paper knife or cutter
4. Cell Battery
5. 3-4 crocodile clips
6. A 3.5 jack earphone
How to Make a Homemade SPY Listening Device
For this, first, take a blank matchbox. Where the trays are kept, make two or two holes on either side. (Note that all four holes should be in front of each other)
Then take a pencil and cut it carefully with the help of a knife. (Note that the graphite lead inside it is not broken) Now break this lead in three equal parts. Sprinkle the forward portion in two leads and rubbing the rear and finishing the spacing. Now insert these leads from one hole in the matchbox to the other. (Both the lead edges should be on one side)
Now the third part you have survived, put it in the side of the compartment, on the side of the lead. Keep in mind that the piece should not slip.
Then with the help of Crocodile Leeds, attach a part of the graphite lead to the cell battery and connect the other with the 3.5 jack earphone. (Note that the colors of both the Crocodile Leeds differ)
Then attach the second part of the battery to the crocodile connector and add it to the bottom of the earphone jack. At the same time, the connector which connects the remaining matches of the match put it in the upper part of the earphone.
After this touch, the finger on any part of the match and you will hear a voice in the earphone speaker.
Then your microphone is ready. If you want to listen to someone, then take a long wire and put it where the earphone was placed and then remove the earphone. Then connect the headphones to it.
To connect the headphones, add a crocodile connector from one part of the wire to the bottom of the earphone jack. And attach the second part of the second wire to the other connector and put it in the earphone’s jack upwards.
So you can see How you can Make a Homemade SPY Listening Device. Keep in mind that no connector should touch each other.
Finally, I hope guys you understand “How to Make a Homemade SPY Listening Device” very useful. If you really think we have made some efforts then don’t forget to appreciate our efforts in the comments below and thanks for visiting.