How to Make A VR Headset for PC at Home: Can you tell how many get a good VR headset? No, let us tell. The online price of the VR headset starts at Rs 500. Many people cannot afford this device because of the budget. Did you know that VR headsets don’t need to be purchased to use it? You can make it at home with an empty box of pizza, shoe, dress. The VR headset, which is available for a minimum of Rs 500, can be prepared at home for just Rs 50.
To create a VR headset, you’ll need:
- An empty box of pizza.
- Two Biconvex lenses.
- Glue for Pasting.
- Paper Niff and Scissors.
- Tape for pasting.
- A wide elastic band.
How to Make A VR Headset for PC at Home:
First, mark 13cmX11.5cm on the pizza box with the help of a scale and cut it. Then drag a line from the edge of the 13cm surface with a gap of 4cm and bend it from there.
Also cut two pieces of 7cmX12.5cm size, 3 pieces of 8cm X 7.3cm size and 2 pieces of 13cmX9cm size.
Then cut the 13cmX9cm pieces with a 9cm gap from the edge of the surface. Then mark 4cm from the edge to the center and cut it into the shape shown in the picture.
Do the same with the other piece. Then add a small cut to the cut moon and add it as shown in the picture. Make sure that you have a big cut so that you get your nose.
Now place both pieces of size 7cmX12.5cm together. Draw a line from the center point on both sides and make a nose-shaped cut from the side center line.
Then the biconvex lens has to be fitted. The lens should be of 25mm diameter and 45mm focal length.
Place the biconvex lens in the center line with an equal gap and cut it on the cardboard. Fix the lens well between the two boards. You can use glue for this.
Now you have to interlink all the pieces. For this, place the 13cmX9cm piece with a nozzle cut on the tape and paste it with another 13cmX9cm piece.
Then paste the 8cmX7.3cm-sized piece on either side of the 13cmX9cm size piece with the help of tape. Now paste the second 13cmX9cm-sized piece from the 8cmX7.3cm piece on the right side.
Once done, add the remaining 8cmX7.3cm third piece to the second piece of 13cmX9cm size. When pasting the pieces, all the corners are well-received.
Now paste the 7cmX12.5cm piece containing the lens in the center of the 13cmX9cm size piece (nose cut). Note that the nose part of both the pieces has to be mixed.
Then fold and fix all the parts above the lens piece as shown in the picture. The phone is then fixed with this headset.
Place a plastic band on either side of the box. Apply the elastic well so that it does not remain loose.
Finally, I hope guys you understand “How to Make A VR Headset for PC at Home” especially helpful. If you really think we have made some efforts then don’t forget to share our efforts in the comments below and thanks for visiting.